Electronics 2000

Is there anyone out there with the knowledge and equipment to deal with electronic questions on mobility scooter systems please?

Relative has scooter which is supposed to do 4/8mph but does only 4/6mph.

Seek to have control unit reset to give the required 4/8mph.

Further detail will be provided to someone with the relevent experience.

Can anyone assist or point in the direction of someone who can please?

Thank you. Pete.

I don't have a great deal of mobility scooter experience but I understand electronics.
Uness the control unit has been re programmed it is unlikely to need to be reset.

I would guess a battery problem is more likely.

There are other possibilities but it sounds like the batt is a bit passed it.

What type of nobility scooter is it?

Tar&stuff.

Very many thanks for your reply Piratepaul.
Will PM with further details.
Thank you Pete.

Hello Paul.
Have sent message by PM and by email.
Could you please confirm your receipt of either?
Thank you, Pete.

Hi, I have had no PMs or email.

Tar&stuff.

PM sent again 11.20hrs
Thank you Pete.

Can anyone offer assistance or point in the direction of someone who could please?
Thank you, Pete.

Try this site. http://www.disabledtraveladvise.co.uk They have a forum dealing with... Common Problems with Mobility Scooters. If you put it to them they will help you out.

Many thanks for your reply.
Unfortunately this is not a " Common problem " and it is therefore highly unlikely, that anyone on that forum would have the
technical knowledge or equipment to assist.
Thank you Pete.

Can anyone offer assistance or point in the direction of someone who could please?
Thank you, Pete.